Our new product, specially designed for medium format 3D photography.
The second large format lens designed and extruded in EUROPE… (after our 3D 20 LPI UV-LF)
in stock in Dublin !
Considering that there was a gap between 3D 20 LPI and 40 LPI sheets so we decided to create this new lens design, encouraged by some 3D photographers. The new lens design is a 3D 28 LPI UV-MF.
Like our 3D 20 LPI UV-LF, this new lens has been designed with photographers for photographers !
– 3D as it’s designed for 3 dimensional images with a viewing angle of 37° like our 3D 20 LPI UV-LF.
– 28 LPI as this lens design does not exist anywhere in the World. – UV as it is produced in PETG-UV like the 3D 20 LPI UV-LF. PETG-UV allows to use the product indoor and outdoor ! – MF for Medium Format as we recommend this lens for smaller image sizes like 1m or 1.2 meter high. – Thickness is 2.15mm – Like our 3D 20 LPI UV-LF, the new lens is produced in Europe.
DPL’s 3D 28 LPI UV-MF is a 2.15 mm thick lenticular lens produced in 122 cm x 180 cm and available in many sizes, see below. This lens has a 37°viewing angle, making it very well suited for 3D lenticular applications printed on digital devices. The material has been extruded with a specially developed UV protection resin to preserve colors when used in outdoor conditions such as bus shelters. PETG-UV allows a much better transparency than other resins like PS…
Unique INDOOR + OUTDOOR use !
See more information below. The 3D 28 LPI UV-MF 122 cm x 180 cm sheets are packaged in boxes of 10 sheets and palletized with a maximum of 150 sheets (15 Boxes) per pallet. Available from DPLenticular’s warehouse and even from 1 sheet or smaller sheet sizes (see our small quantities). Both sides of the product are protected with a transparent liner, don’t forget to pull it off before use !
|Lens design||3D 28 LPI UV-MF for Medium Format|
|Viewing angle||37 degrees|
|Pitch||28.28 – 28.30 LPI (dependent upon output device)|
|Thickness / Gauge||2.15mm nominal|
|Use||Indoor + Outdoor|
|Origin||EUROPE stock in Dublin, Ireland|
Stock size “VLF”
|122 x 180 cm = 48.03”x 70.9” (lenticules parallel to 180cm dimension), smaller sizes are available see below or our small quantities page.|
|Quantity / BOXES||10 sheets per box or or minimum 1 sheet|
|Gross weight||61 kg per 10 sheets box (We place the box on a pallet for transport)|
|Gross size||128 x 183 x 3,5 cm per 10 sheets box|
|Quantity / PALLET||100 sheets per pallet|
|Gross weight / PALLET||630 kg per 100 sheets pallet|
|Gross size / PALLET||128 x 183 x 50 cm|
|Other sizes available:||122 x 120 cm (lenticules parallel to 120cm dimension) see small quantities page (4.07Kg)|
|122 x 100 cm (lenticules parallel to 100cm dimension) see small quantities page (3.39Kg)|
|90 x 120 cm (lenticules parallel to 120cm dimension) see small quantities page|
|61 x 100 cm (lenticules parallel to 100cm dimension) see small quantities page|
|32 x 40 cm (lenticules parallel to 40cm dimension) see small quantities page|
|Transparency||Excellent transparency and surface brightness|
|Custom sheet||we can propose other sheet sizes (depending of the quantity), please contact us|
|Small Quantities||min 1 sheet see small quantities page|
|Optical & Mechanical Properties||see below|
|Cutting||(Unlike polycarbonate,) it can be laser-cut, for information about cutting the sheets, please visit our FAQ page or contact us.|
|Standard stock pallet||two-way entry|
|Surface tension||that of natural resin. No coating needed.|
|Regulations||see our regulations page|
|Reaction to Fire||Classification in accordance to the clauses 11 and 14 of the standard DIN EN 13501-1 2010: B– s2,d0|
|Resin||PetgUV – Polyethylenterephthalate copolymer sheet with UV protection – 100% Recyclable see resin specifications|
|Manufacturing||ISO 9001:2008 and 14001:2004 Certified|
In the case of outdoor use or in a place prone to solar radiation, the sheet must be installed with the lenticular face towards any solar radiation. Optical Properties After ten years our 3D 28 LPI UV-LF lens will, as a direct and exclusive result of exposure to solar radiation and normal weather conditions, have a light transmission value not more than ten (10) units lower than at the time of delivery. Light transmission is measured in accordance with the Standard ASTM D 1003 on cleaned sheets, free of scratches. After ten years the 3D 28 LPI UV-LF lens will, as a direct and exclusive result of exposure to solar radiation and normal weather conditions, have a yellowness value not more than ten (10) units higher than at the time of delivery. The yellowness value (yellowness index) is measured in accordance with the Standard ASTM E 313-98 on cleaned sheets, free of scratches. Mechanical Properties After ten years, the 3D 28 LPI UV-LF lens will, as a direct and exclusive result of exposure to sun radiation and normal weather conditions, have a Young’s Modulus of e ≥ 1900 MPa. The Young’s Modulus is measured in accordance with the Standard ISO 527-1,2 on standard specimen bodies.