3D 28 LPI PETG-MF lenticular sheet |
.
3D 28 LPI PETG-MF™ lenticular sheet, specially designed for medium format 3D photography.
The second large format lens designed and extruded in EUROPE… (after our 3D 20 LPI UV-LF™)
28 LPI is expected in stock in May 2025
Considering that there was a gap between 3D 20 LPI UV-LF™ and 40 LPI PETG VLF sheets so we decided to create this UNIQUE lens design, encouraged by some 3D photographers. We also noticed that some of our customers like using the 37° lens for flip images as the angle allows a faster effect.
The lens design is a 3D 28 LPI PETG-MF.
Like our 3D 20 LPI UV-LF™, this 3D 28 LPI PETG-MF lens has been designed with photographers for photographers !
– 3D as it’s designed for 3 dimensional images with a viewing angle of 37°, just like our 3D 20 LPI UV-LF™.
– 28 LPI as this lens design does not exist anywhere in the World.
– it is produced with recyclable PETG like the 3D 20 LPI UV-LF™ and the Motion 20 LPI PETG-LF.
– MF for Medium Format as we recommend this lens for smaller image sizes like 1m or 1.2 meter high.
– Thickness is 2.15mm
– Like our 3D 20 LPI UV-LF™ and the Motion 20 LPI PETG-LF, this lens is produced in Europe.
3D 28 LPI PETG-MF is a 2.15 mm thick lenticular lens produced in 122 cm x 180 cm and available in many sizes, see below. It’s only available in smaller sizes today.
This lens has a 37° viewing angle, making it very well suited for 3D lenticular applications printed on digital devices.
.
If you want to try the 3D 28 LPI PETG-MF, we can send you an interlaced file showing a wonderful 3D watch:
This image has been created for us by Remy Verbanaz (www.myluxury3d.com).
Interesting to keep in mind: the 3D 28 LPI PETG-MF has been chosen because it displays exactly half the depth of our 3D 20 LPI UV-LF™. You will find the lenticular depth calculator here. This means that if you are perfectly satisfied with an A1 print on the 3D 28 LPI PETG-MF material, you can print straightforwardly on the 3D 20 LPI UV-LF™ at twice the size (so 119 x 168 cm) and get exactly the same sharp/blur balance. And of course, if you have a perfect 3D 20 LPI UV-LF™ print, you can print straightforwardly the same file at exactly half the size on the 3D 28 LPI PETG-MF.
.
PETG allows the transparency to remain consistent, unlike other resins (like PS)…
Available from 3D Products – DPLenticular’s warehouse in Belgium and even from 1 sheet or smaller sheet sizes – see our small quantities Order here.
Both sides of the product are protected with a transparent liner, don’t forget to pull it off carefully before use !
| Lens design | 3D 28 LPI PETG-MF for Medium Format | |
| Viewing angle | 37 degrees | |
| Pitch |
28.28 – 28.30 LPI (dependent upon output device) | |
| Thickness / Gauge | 2.15mm nominal | |
| Use | Indoor + Outdoor | |
| Origin | produced in EUROPE – stock in Belgium | |
| Order here | ||
| sizes available in May: | 122 x 182 cm (lenticules parallel to 182cm dimension) min 10 sheets order here | |
| 122 x 120 cm (lenticules parallel to 120cm dimension) from our web shop | ||
| 122 x 100 cm (lenticules parallel to 100cm dimension) from our web shop | ||
| 90 x 120 cm (lenticules parallel to 120cm dimension) from our web shop | ||
| 61 x 100 cm (lenticules parallel to 100cm dimension) from our web shop | ||
| 61 x 60 cm (lenticules parallel to 60cm dimension) from our web shop | ||
| 30 x 40 cm (lenticules parallel to 40cm dimension) Order here | ||
| Transparency | Excellent transparency and surface brightness | |
| Custom sheet |
we can propose other sheet sizes (length) but only during the production, please contact us | |
| Small Quantities |
min 1 sheet see small quantities page | |
| Order here | ||
| Cutting |
it can be laser-cut (unlike polycarbonate), for more information, see our FAQ page or contact us. | |
| Standard stock pallet | two-way entry | |
| Surface tension | that of natural resin. No coating needed. | |
| Regulations | see our regulations page | |
| Reaction to Fire | Classification of reaction to fire in accordance with NF EN 13501-1+A1 : 2013: B– s2,d0 | |
| Resin | Petg – Polyethylenterephthalate copolymer sheet – 100% Recyclable (class 7) see resin specifications |
|
| Manufacturing | ISO 9001:2008 and 14001:2004 Certified |
